What makes the Ultimate Comfort Zone® so unique?

You take control of your own comfort!
Roth offers you the best heat distribution for comfort, energy and savings. Roth systems optimize heating patterns for different zones, rooms or floor materials. Rooms always maintain the set temperature to eliminate chilly floors or overheated ceilings. Whether you have carpeting, hardwood, tile or stone, your floors will always be comfortably warm. No more cold feet.

This illustration clearly shows how closely the temperature distribution follows the ideal heating curve, according to scientists. The ideal temperature for comfort is 73˚F / 23˚C at foot level
and 67˚F / 19˚C at head level. Compared to other systems, in-floor hydronic radiant heating
provides superior heat distribution (see chart), especially in rooms with high or vaulted ceilings.

Energy savings
Room temperatures can be reduced by as much as 5˚F without sacrificing comfort. For a typical home this means you can save up to 30% on heating. When doors are closed, up to 50% of the heat will be recovered instantly. Half of the total heat is provided by radiation, which travels at the speed of light.

Cost savings
Roth systems are easy to design, and can be installed quickly. Your certified Roth system installer has ready access to world-class technical support, heating system design data and engineering.

Quiet operation, health and safety issues
Water is far denser than air so it carries much more heat. Additionally, the water runs slowly through noise-absorbing plastic tubing. Small residential circulators are so quiet they can't even be heard
in the utility room. Radiant heating minimizes air movement, which reduces drafts in the home.
As a result, dust, germs, viruses and mold aren't spread around the home. Allergy sufferers
can breathe a sigh of relief.

Decorating freedom
The entire system is hidden, and there are no obstructions to interfere with the use of the room.
There will be consistent heating throughout the entire house without any design restrictions.

Comfortable basements
What was once a damp, often chilly room can quickly be turned into a comfortable prime living area. Warm floors keep rooms dry and basement floors are now as comfortable as the floors on
any other level.

Warm floors never stay wet
Water on the bathroom floor? No problem. Snow and ice in the garage? Don't worry. Roth radiant heating ensures that, if wet, your floors - and shoes, towels and clothes - will dry faster,
and stay dry longer; which helps to eliminate mold, mildew and pesky, unwanted odors.

Take control of your comfort

The MultiTherm system
The new MultiTherm system takes a unique approach to enhanced control by maintaining constant flow through the loops and changing the water temperature for each individual loop based on actual demand. The result: a level of performance, control and comfort never before possible. Here's how
it works: Each MultiTherm system is supplied with an automatic mixing valve for each loop inside
its manifold, which ensures that the water supply and temperature for each loop always match
the actual heat requirement of each room/zone.

• Allows for individual water temperatures for each tubing loop on the same manifold.


• Maintains the ultimate comfort of any room/zone with real-time feedback, intelligent control
  and constant circulation.


• Allows for loops in different floor construction methods to share the same manifold.


• Automatically compensates for design flaws or changes in floor covering.


• Accommodates the dynamics of the building to provide faster and better response.


• Can control radiant floors, low temperature radiators, or low water temperature air handlers mixed on the same manifold.

Hydronic Radiant Heating Systems: Heat that's alway's "in the zone".

Comfort control
Roth systems are designed to ensure easy control of heating in each room or zone. Thermostats
for each separate heating zone give you effortless touch control to accommodate warmer bathrooms or cooler bedrooms for example. Direct sunlight, a burning fireplace, a large number of active guests many such factors can disrupt the heat distribution of a traditional system, resulting in both higher costs and temperature-related inconveniences. Roth puts an end to these and other problems
with a system that provides the ultimate in control, efficiency and savings. Nothing compares
to a Roth Hydronic Radiant Heating System.

Superior PEX Tubing
Roth manufactures the highest quality PEX tubing, made of crosslinked polyethylene, to guarantee unparalleled long-term performance. Two major components of the Roth hydronic radiant heating system are the proven PEX distribution tubing, and superior one-piece supply and return manifolds. Both help ensure economical, trouble-free installation of a system that will provide you with peak efficiency, ultimate comfort and long-term service.

Professional support from planning through design and installation
Roth will provide you with assistance, including heat-loss calculations, for your ultra comfort zone hydronic radiant heating system. Using leading-edge software programs, Roth's design and technical support team will guide you through every aspect of the project. Roth-trained installers will receive ongoing support throughout the installation, including easy-to-follow installation manuals.

Other accessories to add to your comfort

Roth Manifold Shunt
Developed to easily add radiant floor heating capability to existing high temperature hydronic heating systems. Roth shunts connect directly to the manifold assemblies. They can be used singly or in multiples with any boiler system, and when coupled with an outdoor reset control, the shunts efficiently provide weather-responsive system temperatures to the radiant heat manifolds.
Two model sizes are available.

Mini-Shunt
Roth mini-shunts were developed to ensure easy installation and delivery of radiant floor heating to small areas such as bathrooms, kitchens and entrances with an existing, high-temperature, water source. The pre-assembled kit comprises a circulation pump, a mixing valve, and a non-electric temperature control. This system is available in three PEX-sizes.

Accessories
Roth radiant heating systems come with all the accessories you need for easy installation,
whatever the size of your project. Accessories include four-way valves, pressure testers, compression couplings to join PEX tubing to the manifold, pressure balancing valves, etc.
Roth also provides all the control mechanisms you'll need to keep your system running perfectly.

Certifications: